Experimental and simulation studies on plasma gasification of waste feedstocks for clean energy production

Simple item page
dc.contributor.authorMallick, Roni
dc.date.accessioned2024-02-05T09:59:05Z
dc.date.available2024-02-05T09:59:05Z
dc.date.issued2024
dc.descriptionSupervisor: Vairakannu, Prabhuen_US
dc.description.abstractIn the cycle of waste generation and management, the recovery of energy from solid wastes through highly efficient and low pollutant technology is a promising way. Hence, the current study focuses on clean syngas production via plasma gasification of solid waste termed as refused derived fuel (RDF), computer keyboard plastic waste (CKPW) and electrical switch waste (ESW). On a laboratory scale, several experiments are conducted to assess the impact of feed mass flow rate, feed CO2 gas flow rate and plasma torch power on the syngas concentration and yield. A 3-E analyses comprising cold gas efficiency (CGE), exergy efficiency and levelized cost of syngas (LCOS) is performed, considering all the feeds. Further, two newly emerging technologies, (a) molten carbonate fuel cell (MCFC) and (b) chemical looping reforming (CLR), are integrated with plasma gasification for hydrogen and electricity production. The simulation of the plants is performed using Aspen plus and consequently, 4-E (3-E and environmental) analyses are executed. A high-quality syngas with H2 (32.23 vol.%), CO (51.98 vol.%) content, possessing a calorific value of 16.46 MJ/m3 and CGE of 39.04% is obtained for CKPW at the plasma power of 2 kW. However, with parameters of 30 g/10 min, 0.4 lpm and 0.75 kW, a higher CGE of 49.90% and exergy efficiency of 48.30% are achieved using RDF feed. While the lowest LCOS value of 23.40 INR/kWh is estimated for CKPW feed. The proximate and ultimate analysis of oil obtained from CKPW feed showed properties similar to diesel, with high C (90.8 wt.%), H (6.8 wt.%) and LHV (39.13 MJ/kg), and low O (0.46 wt.%) content. Whereas, the residue of RDF has high ash content of 13.95 wt.%. Ash contains a good amount of Ti, Ba, Ca, Si, Al, etc., which can find applications in healthcare, paints, dye-casting and the cement industry after enrichment.en_US
dc.identifier.otherROLL NO.186107013
dc.identifier.urihttps://gyan.iitg.ac.in/handle/123456789/2542
dc.language.isoenen_US
dc.relation.ispartofseriesTH-3268;
dc.subjectPlasma Gasificationen_US
dc.subjectRefused Derived Fuelen_US
dc.subjectComputer Keyword Plastic Wasteen_US
dc.subjectElectrical Switch Wasteen_US
dc.subjectMolten Carbonate Fuel Cell and Chemical Looping Reformingen_US
dc.titleExperimental and simulation studies on plasma gasification of waste feedstocks for clean energy productionen_US
dc.typeThesisen_US
Files
Original bundle
Now showing 1 - 2 of 2
No Thumbnail Available
Name:
Abstract-TH-3268_186107013.pdf
Size:
110.5 KB
Format:
Adobe Portable Document Format
Description:
ABSTRACT
Download
No Thumbnail Available
Name:
TH-3268_186107013.pdf
Size:
10.98 MB
Format:
Adobe Portable Document Format
Description:
THESIS
Download
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed to upon submission
Description:
Download
Collections
PhD Theses (Chemical Engineering)