Non-conventional plasma machining and nano-polishing of optics

dc.contributor.authorKrishna, Enni
dc.date.accessioned2024-12-12T11:34:39Z
dc.date.available2024-12-12T11:34:39Z
dc.date.issued2023
dc.descriptionSupervisor: Das, Manas
dc.description.abstractIn this study, a medium-pressure plasma flow system was designed and developed for plasma machining of fused silica optics. The results showed that the plasma flow system can be used for long machining times (more than 60 minutes) with a material removal rate that is 300% higher than the earlier studied confined system. The study also found that there is an improvement in surface integrity, as identified by Raman microscopy, and surface topography, as determined by the 3D profiler. In this study, a non-invasive method was developed using an optical emission spectrometer to predict MRR during polishing. The ComsolĀ® simulation was utilized tooptimize the plasma chamber configuration, resulting in a custom-made chamber with a Vshaped groove that showed uniform reactive radical distribution for polishing free-form optics. Confocal Raman microscopy was used to quantify the depth of damage on ground fused silica. This methodology was adopted to optimize the rotary ultrasonic machining parameters for shaping fused silica hemispherical resonator shells (HRG). To investigate the cause of Ring Laser Gyroscope device failure, a photoluminescence spectrometer was utilized for analysis and verification. Furthermore, the SSD depth at the nanometer scale was quantified for the ultrasmooth prism substrate using Secondary Ion Mass Spectrometer (SIMS). A process flow was established for removing 350 nm depth of material without affecting the surface finish of the ultra-fine fused silica substrate, using plasma processing followed by chemical leaching to enhance the surface integrity of the prism substrate. In this study, a non-invasive method was developed using an optical emission spectrometer to predict MRR during polishing. The ComsolĀ® simulation was utilized to optimize the plasma chamber configuration, resulting in a custom-made chamber with a V-shaped groove that showed uniform reactive radical distribution for polishing free-form optics. Confocal Raman microscopy was used to quantify the depth of damage on ground fused silica. This methodology was adopted to optimize the rotary ultrasonic machining parameters for shaping fused silica hemispherical resonator shells (HRG). To analyze and verify the plausible mechanism of Ring Laser Gyroscope device failure, a photoluminescence spectrometer was used. Furthermore, the SSD depth at the nanometer scale was quantified for the ultra-smooth prism substrate using Secondary Ion Mass Spectrometer (SIMS). A process flow was established for removing 350 nm depth of material without affecting the surface finish of the ultra-fine fused silica substrate, using plasma processing followed by chemical leaching to enhance the surface integrity of the prism substrate. This study compares plasma etching versus wet chemical etching and suggests plasma machining as a safer alternative.
dc.identifier.otherROLL NO.186103016
dc.identifier.urihttps://gyan.iitg.ac.in/handle/123456789/2744
dc.language.isoen
dc.relation.ispartofseriesTH-3240
dc.titleNon-conventional plasma machining and nano-polishing of optics
dc.typeThesis
Files
Original bundle
Now showing 1 - 2 of 2
No Thumbnail Available
Name:
Abstract-TH-3240_186103016.pdf
Size:
379.38 KB
Format:
Adobe Portable Document Format
Description:
ABSTRACT
No Thumbnail Available
Name:
TH-3240_186103016.pdf
Size:
16.33 MB
Format:
Adobe Portable Document Format
Description:
THESIS
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed to upon submission
Description: